We fabricate spherical lenses from 0.250"Ø to 8"Ø using
materials such as BK-7 to Excimer Grade Fused Silica. Surface finishes are usually 1/10l spherical and/or 1/10l flat with 20/10 or better scratch & dig.
Plano/Concave & Plano/Convex cylinder lenses with dimensions of 2" Ø , 2" x 2" square, and 3" x 3" square are fabricated on a daily basis. The material used is primarily Suprasil® 2. Standard tolerances are 1/4l with 40/20 scratch and dig, but tighter tolerances can be met.
The Thermo Scientific™ ARL™ EQUINOX 3000 X-ray Diffractometer for research enables accurate measurements.
KLA’s Filmetrics F40 allows you to transform your benchtop microscope into an instrument to measure thickness and refractive index.
This product profile describes the properties and applications of the ProMetric® I-SC Solution Imaging Colorimeter.
Dr. Stefan Weber
AZoOptics speaks to Phaseform, whose approach to adaptive optics is helping to refine optic technologies across applications like life sciences microscopy and optical inspection.
Dr. David Dung
We spoke with University of Bonn spin-off Midel Photonics, a start-up company whose laser beam shaping technology is hoping to sharpen up the laser industry.
Matthias Sachsenhauser, Ph.D.
Following Laser World of Photonics 2022, we spoke with Matthias Sachsenhauser from Hamamatsu Photonics about the role of laser-driven light sources in the future of the photonics sector.