New Material Could Lead to the Development of Cheaper and Efficient Solar Cell Devices

New solar cell devices that are cheaper and easier to make could soon make their way to market thanks to materials made at Imperial College London.

Traditional solar cells are made from silicon, which has good efficiency and stability, but is relatively expensive to make and can only be manufactured in stiff panels.

Perovskite solar cells offer an intriguing alternative; they can be printed from inks, making them low cost, high efficiency, thin, lightweight and flexible. However, they have trailed behind silicon solar cells in efficiency and, importantly, stability, breaking down under normal environmental conditions.

New metal-containing materials called ferrocenes could help with these problems. Researchers from City University of Hong Kong (CityU) have added Imperial-made ferrocenes into perovskite solar cells, vastly improving their efficiency and stability. The results are published today in the journal Science.

Co-lead author Professor Nicholas Long, from the Department of Chemistry at Imperial, said: "Silicon cells are efficient but expensive, and we urgently need new solar energy devices to accelerate the transition to renewable energy. Stable and efficient perovskite cells could ultimately allow solar energy to be used in more applications – from powering the developing world to charging a new generation of wearable devices.

"Our collaboration with colleagues in Hong Kong was beautifully serendipitous, arising after I gave a talk about new ferrocene compounds and met Dr Zonglong Zhu from CityU, who asked me to send over some samples. Within a few months, the CityU team told us the results were exciting, and asked us to send more samples, beginning a research program that has resulted in perovskite devices that are both more efficient and more stable."

The Power of Ferrocenes

Perovskite forms the 'light-harvesting' layer of solar cell devices. However, these devices have been less efficient at converting solar energy into electricity than silicon-based solar cells, primarily because the electrons are less 'mobile' – they are less able to move from the harvesting layer to the electricity conversion layers.

Ferrocenes are compounds with iron at their centre, surrounded by sandwiching rings of carbon. The unique structure of ferrocene was first recognised by Imperial's own Nobel Prize-winner Professor Geoffrey Wilkinson in 1952, and ferrocenes are still being researched around the world today for their unique properties.

One property their structure gives them is excellent electron richness, which in this case allows electrons to move more easily from the perovskite layer to subsequent layers, improving the efficiency of converting solar energy to electricity.

Tests performed by the team CityU and in commercial labs show that the efficiency of perovskite devices with an added ferrocene layer can reach 25%, approaching the efficiency of traditional silicon cells.

Two Birds with One Stone

But this isn't the only problem the ferrocene-based materials solved. The team at Imperial have been experimenting with attaching different chemical groups to the carbon rings of ferrocene, and after sending the Hong Kong team several versions of these, made by PhD student Stephanie Sheppard, the collaborators discovered a version that significantly improves the attachment of the perovskite layers to the rest of the device.

This added attachment power improved the stability of the devices, meaning they maintained more than 98% of their initial efficiency after continuously operating at maximum power for 1,500 hours. The efficiency and stability gained thanks to the addition of a ferrocene layer brings these perovskite devices close to current international standards for traditional silicon cells.

Lead researcher Dr Zonglong Zhu from CityU said: "We are the first team to successfully boost the inverted perovskite solar cell to a record-high efficiency of 25% and pass the stability test set by the International Electrotechnical Commission."

The team have patented their design and hope to licence it, eventually bringing their perovskite devices to the market. In the meantime, they are experimenting with different ferrocene designs to further improve the performance and stability of the devices.

Source: https://www.imperial.ac.uk/

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Your comment type
Submit
Azthena logo

AZoM.com powered by Azthena AI

Your AI Assistant finding answers from trusted AZoM content

Azthena logo with the word Azthena

Your AI Powered Scientific Assistant

Hi, I'm Azthena, you can trust me to find commercial scientific answers from AZoNetwork.com.

A few things you need to know before we start. Please read and accept to continue.

  • Use of “Azthena” is subject to the terms and conditions of use as set out by OpenAI.
  • Content provided on any AZoNetwork sites are subject to the site Terms & Conditions and Privacy Policy.
  • Large Language Models can make mistakes. Consider checking important information.

Great. Ask your question.

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.