Posted in | Optics and Photonics

Laser Components Offers Optomechanical Mounts with Standardised Threaded Holes

If you would you like to expand your range of optomechanical components, or you are looking for inexpensive accessories, then we have good news: our optomechanical mounts have standardised threaded holes, and our rods have fixed diameters.

Optomechanical mounts

Your existing laboratory inventory can easily be combined with other components. Our optomechanical components are adaptable with different threaded holes in a single element!

Each rod is fitted with two different threaded holes: an M4x0.7P on one side and an M6x1.0P on the other side. The corresponding mounts have similar flexibility. They can hold rods that have a diameter of 12.0mm to 12.7mm and can be securely adjusted with a threaded screw.

Whether you require a positioning system, an adjustable optical mount, or a variable aperture, our parts can be integrated into your existing setup without a problem. Threads are available in metric and English.

For more information visit our website at
http://www.lasercomponents.com/uk/optics/optomechanical-components/optomechanical-mounts/

Website address for publishing
Please use www.lasercomponents.co.uk if this press release is published

Trade Show

  • Photonex Scotland Roadshow, June 04, 2014, Edinburgh Conference Centre, Heriot-Watt University, Booth S14
  • Photonex Cambridge Roadshow, June 18, 2014, Robinson College, University of Cambridge, Booth S28
  • Photon14, September 01 - 04, 2014, Imperial College London, Booth 19
  • Photonex 2014, October 15 - 16, 2014, Ricoh Arena, Coventry, Booth D20

The Company
The Company formed in 1986 and is located at six locations in Germany, France, UK, Canada and USA. Extensive in-house production accounts for approximately half its turnover. Currently, the family-run business employs more than 120 people worldwide.

Source: http://www.lasercomponents.com/

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    Laser Components (UK) Ltd.. (2019, February 26). Laser Components Offers Optomechanical Mounts with Standardised Threaded Holes. AZoOptics. Retrieved on December 09, 2019 from https://www.azooptics.com/News.aspx?newsID=19081.

  • MLA

    Laser Components (UK) Ltd.. "Laser Components Offers Optomechanical Mounts with Standardised Threaded Holes". AZoOptics. 09 December 2019. <https://www.azooptics.com/News.aspx?newsID=19081>.

  • Chicago

    Laser Components (UK) Ltd.. "Laser Components Offers Optomechanical Mounts with Standardised Threaded Holes". AZoOptics. https://www.azooptics.com/News.aspx?newsID=19081. (accessed December 09, 2019).

  • Harvard

    Laser Components (UK) Ltd.. 2019. Laser Components Offers Optomechanical Mounts with Standardised Threaded Holes. AZoOptics, viewed 09 December 2019, https://www.azooptics.com/News.aspx?newsID=19081.

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Submit