Insights from industry

Photonics: Enabling High-Speed Telecom and Satellite Communication Networks

insights from industryLjiljana DurdevicTechnology and Market ExpertHamamatsu Photonics

In this interview, AZoOptics speaks with Dr. Ljiljana Durdevic, Technology and Market Expert, from Hamamatsu Photonics, about the role of photonics in telecom and satellite communication networks. She discusses how photonics can support high-bandwidth, long-distance communication and explores the importance of lasers, photodiodes, avalanche photodiodes, InGaAs image sensors, and optical transceivers in optical communication systems.

Can you please introduce yourself and your role at Hamamatsu Photonics Europe?

My name is Ljiljana Durdevic, and I am a Technology and Market Expert at Hamamatsu Photonics. My work focuses on using photonics for telecom and satellite networks, including how photonic technologies can contribute to different communication environments and the technologies used across these links.

To what extent does photonics enable and advance modern communication systems?

I always like to ask a simple question: "How far can information travel?" If we send the word "hello" from a phone, the information could travel meters, kilometers, or potentially thousands of kilometers. However, the message itself does not tell us what physical path it will take. The infrastructure can be completely different, with one part remaining within terrestrial or data center infrastructure and another involving a satellite link.

A better question, therefore, is "How effectively information can travel over any distance?" Effectiveness means preserving the information while meeting requirements for bandwidth, latency, power, and cost.

We can consider three major media for carrying information: copper or electrical connections, radio frequency wireless links, and optical links. Copper is mature and simple over short distances, but high-frequency losses and signal integrity can become increasingly difficult. Radio frequency offers mobility and eliminates physical cables, but it can suffer from path loss, interference, and spectrum limitations.

Photonics offers very high bandwidth and long transmission reach, although it requires electro-optical conversion, and free-space systems can present alignment challenges. The appropriate medium ultimately depends on the link requirements. However, as the distance becomes longer, photonics becomes increasingly important.

How effectively can information travel over any distance? | Webinar Clip by Ljiljana Durdevic

What are the main requirements driving the development of modern optical links?

Modern optical links are being pushed in three directions: higher data rates, longer or more challenging links, and tighter size, weight, and power requirements.

At the system level, this means controlling parameters such as bandwidth, linewidth, wavelength stability, modulation fidelity, and receiver sensitivity. The communication channel then introduces its own impairments. In fiber, we can encounter attenuation and dispersion, while in free space there can be beam divergence, pointing, and atmospheric effects.

Ultimately, this becomes a link-budget issue. Every decibel of loss and every watt of platform power affects the achievable reach and data rate, while the available bandwidth constrains how much information the link can carry. Photonics influence these requirements through their high bandwidth, wavelength stability, modulation fidelity, and sensitivity at the receiver.

How are photonic technologies used across data centers, telecom, and satellite networks?

The photonic building blocks vary according to the communication environment. In data centers, information relies heavily on optical transceivers and short-range optical interconnects. Telecom adds coherent optics, wavelength-controlled sources, and WDM transport.

Satellite networks go a step further by introducing laser communication terminals and free-space optical links. Across these environments, detector technologies recover the data. InGaAs technologies are particularly important because of the wavelengths involved.

There are also supporting photonic technologies. Image sensors can support acquisition, tracking, pointing, and beam monitoring, while optical receivers integrate transmitting and receiving functions into a usable communication interface.

At the component level, the laser generates the optical carrier, photodiodes and APDs detect the signal, and sensors provide spatial information for alignment and tracking.

What role do laser sources play in optical communications?

For communication, the laser is not simply a source of optical power. It also defines the carrier wavelength, spectral purity, and stability on which information can be transmitted.

Photonics portfolios often include supercontinuum white lasers, coherent single-frequency lasers, and ultrafast femtosecond and picosecond lasers. For the communication application, coherent sources are particularly relevant.

The coherent sources use distributed-feedback fiber-laser technology. A diode pumps the fiber-laser system through an isolator and wavelength-division multiplexing (WDM) coupler, which then feed a short-fiber laser cavity containing a wavelength-selective grating. The short cavity and dual-fiber architecture help reduce thermal and acoustic sensitivity, which is particularly important for telecom applications.

Why are narrow linewidth and low phase noise important for telecom lasers?

Ultra-stable optical carriers are important because phase noise and linewidth directly affect communication performance. A narrow linewidth corresponds to a more concentrated optical carrier and a longer coherence time.

Laser frequency can move due to temperature changes, variations in refractive index, acoustic disturbance, and strain. The sources discussed specify linewidths between 0 and 1 kHz and low phase noise for communication applications. These properties matter because transmitter or local-oscillator phase fluctuations can increase the burden on the system and degrade phase-sensitive modulation.

The fiber laser cavity package is also a functional part of the design. Mechanical packaging can control strain, thermal tuning, and the tuning of the grating and cavity. Therefore, packaging is not simply protection. It also influences wavelength control, stability, and the ability to tune and lock the optical carrier.

Why are InGaAs photodiodes and avalanche photodiodes important for telecom and satellite links?

InGaAs technology is particularly important because telecom and satellite links operate around near-infrared communication wavelengths. Silicon reaches its limitations before the 1.3 and 1.55 micrometer telecom windows, whereas InGaAs can cover these wavelengths.

There are also important speed considerations. Small detectors, low junction capacitance, and reverse bias can support high-speed carrier extraction, while low dark currents can help reduce the minimum optical power required at the receiver.

There are three important detection regimes to distinguish. A PIN photodiode converts photons into electron-hole pairs without internal multiplication. An avalanche photodiode uses controlled avalanche multiplication, typically providing internal gain while maintaining an analog relationship to optical power. SPADs operate above breakdown in Geiger mode, where a single carrier can trigger a large avalanche. A SPAD is therefore a photon-event detector rather than simply a high-gain APD.

For high-speed optical communication, the InGaAs photodiode portfolio extends to devices supporting data rates up to 100 Gbit/s.

Image credits: Shutterstock

How can InGaAs image sensors support free-space optical communication?

The objective changes slightly when moving from photodiodes and avalanche photodiodes to image sensors. Instead of measuring only how much optical power is present, we also want to know where the light lands in space.

A two-dimensional InGaAs array preserves spatial information about the incoming light. Unlike a single photodiode, which measures how much light is present, an image sensor can tell us where the beam falls and how its position changes. This is particularly valuable for free-space optical systems because it supports acquisition, alignment, and tracking.

The image sensor is therefore complementary to the high-speed communication detector rather than replacing it. Different readout modes also affect tracking performance. Higher frame rates and lower latency allow faster beam motion or jitter to be observed and corrected, although noise, exposure time, and signal levels still determine usable tracking performance.

How do optical transceivers integrate these photonic technologies?

An optical transceiver combines the source, detectors, optics, and electronics into a complete transmit-and-receive interface, closing the electrical-to-optical-to-electrical chain.

On the transmit side, electrical data drives the laser through the transmitter electronics and optics. The optical signal then crosses the free-space channel. On the receiver side, the optics collect the beam, the PIN photodiode converts it back into an electrical signal, and the receiver recovers the data. Full-duplex operation allows transmission and reception in both directions over the same interface.

The important point is that integration involves much more than the laser or photodiode. It also includes alignment with the optical path, driver and receiver electronics, the mechanical package, and the electrical interface. This represents system-level integration of the source, detector, optics, and signal electronics.

What are the key considerations when designing a complete optical communication link?

Each technology solves a different part of the same information-transfer problem. The laser generates the optical carrier, while the propagation channel determines how much of the signal survives. APDs can detect photons in very low-light regimes; image sensors help maintain beam alignment and measure beam position for acquisition, tracking, and alignment; and the transceiver can integrate transmit and receive functions.

Reliable communication therefore depends on the complete chain. We need enough received power, sufficient system bandwidth, and a properly maintained optical beam. Every decibel of loss, bandwidth limitation, and pointing error contributes to the final link margin.

The important consideration is not simply how far a signal can travel. The challenge is preserving sufficient bandwidth, fidelity, and margin while also meeting constraints on power, size, and cost. Photonics provides the physical layers that enable this, with lasers generating the optical signal, detectors recovering information a,nd imaging systems helping make the optical link useful.

About Dr. Ljiljana Durdevic

Dr. Ljiljana Durdevic is a Technology and Market Expert at Hamamatsu Photonics, where she works on advanced photonic technologies and their applications across areas such as optical communications, sensing, and emerging photonics. She holds a PhD in Optics and Photonics and has several years of research and development experience. Her experience spans advanced photonic technologies and their application to optical communications, sensing, and emerging photonics markets.

She works closely with optical sources, InGaAs photodetectors, avalanche photodiodes, image sensors, and optical transceivers, connecting individual component technologies with wider system requirements such as bandwidth, wavelength stability, receiver sensitivity, alignment, and link reliability. Her work also involves engaging with customers to identify photonic solutions for telecom, satellite communications, and other high-performance applications.

Image

This information has been sourced, reviewed, and adapted from materials provided by Hamamatsu Photonics Europe.

For more information on this source, please visit Hamamatsu Photonics Europe.

Disclaimer: The views expressed here are those of the interviewee and do not necessarily represent the views of AZoM.com Limited (T/A) AZoNetwork, the owner and operator of this website. This disclaimer forms part of the Terms and Conditions of use of this website.

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    Hamamatsu Photonics Europe. (2026, November 18). Photonics: Enabling High-Speed Telecom and Satellite Communication Networks. AZoOptics. Retrieved on November 18, 2026 from https://www.azooptics.com/Article.aspx?ArticleID=2968.

  • MLA

    Hamamatsu Photonics Europe. "Photonics: Enabling High-Speed Telecom and Satellite Communication Networks". AZoOptics. 18 November 2026. <https://www.azooptics.com/Article.aspx?ArticleID=2968>.

  • Chicago

    Hamamatsu Photonics Europe. "Photonics: Enabling High-Speed Telecom and Satellite Communication Networks". AZoOptics. https://www.azooptics.com/Article.aspx?ArticleID=2968. (accessed November 18, 2026).

  • Harvard

    Hamamatsu Photonics Europe. 2026. Photonics: Enabling High-Speed Telecom and Satellite Communication Networks. AZoOptics, viewed 18 November 2026, https://www.azooptics.com/Article.aspx?ArticleID=2968.

Ask A Question

Do you have a question you'd like to ask regarding this article?

Leave your feedback
Your comment type
Submit

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.