Posted in | News | LEDs | Lighting | Semiconductors

Industry's First 2Amp LED Driver in a Single Chip Solution

Exar Corporation has released the SP7600 LED driver capable of driving high power LEDs up to 2Amps. The SP7600 is a single chip switching buck LED driver with an integrated 100mohm MOSFET in a thermally enhanced SO-8 package. With a 4.5V to 29V operating range this LED driver can support most retail and architectural lighting systems which typically use 12V or 24V power sources. New consumer electronics devices can also find a use for this high current LED driver, such as the latest LED compact projectors.

"The SP7600 is the highest current monolithic LED driver on the market and is designed to meet the needs of the latest high current LEDs such as the latest 1.5Amp Luxeon K2," said Jon Cronk, director, Power Management Marketing. "The monolithic SP7600 is Exar's second is a series of LED driver products targeted at the architectural and general lighting markets."

Key Product Features

Both PWM dimming up to 1kHz, and analog dimming are supported by the SP7600. With a 0.2V feedback, power dissipation in the current sense resistor is minimized resulting in efficiency peaking at 95%, and the 1.2MHz operating frequency allows for a minimal footprint design which fits in the same board space as a 1.5Amp Luxeon K2 and it's heat sink. Operation at 1.2MHz at the maximum input voltage of 29V can be a challenge for many buck regulators but with a guaranteed minimum on-time of 100ns the SP7600 can easily convert from 29V to the 4V across the LED. There is also an adjustable peak current limit control to protect the internal switch in the case of a fault condition.

Power Management Products

Highly reliable, efficient, and accurate, power management is a critical part of any technology system. Exar has a broad array of high-performance and industry-proven power management solutions including handset and lighting controls, power conversion, and standard linear devices.

Prices, Packages, Availability and Additional Information

Samples of the SP7600 are available now. The operating range is -40 degrees C to +85 degrees C temperature range. In 1k piece quantities the SP7600 is $1.49 and additional information on this product can be found at http://www.exar.com/Common/Content/ProductDetails.aspx?ID=SP7600 . Additional information on this and other power products can be found at http://www.exar.com/Common/Content/Product.aspx?Parent=2&ID=116.

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Your comment type
Submit

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.