Laser Components' Output Couplers

LASER COMPONENTS has over 30 years’ experience producing the highest quality optical coatings.  We manufacture partially reflective mirrors as standard for the wavelength range 193 nm – 5 um.  Partially reflective mirrors are generally produced for 0° AOI as output couplers, or for 45° as beam splitters, though other incident angles may be manufactured upon request.

Partially-reflective coatings. Image Credit: Laser Components (UK) Ltd.

Output couplers may be used for example in excimer lasers.  For use outside of the cavity, the coating is applied directly to fused silica substrates, but when the mirrors are used inside the resonator the coatings and substrate must be chlorine or fluorine resistant as they are exposed to the laser gas.  In such a case, special chlorine and fluorine coatings are applied to either CaF2 or MgF2 substrates.  
 
We stock a number of standard output couplers, but specialise in producing custom parts to order.     
 
Further information Partially Reflective Coating - Coated Laser Optics (lasercomponents.com)

Source: https://www.lasercomponents.com/uk/

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    Laser Components (UK) Ltd.. (2022, May 30). Laser Components' Output Couplers. AZoOptics. Retrieved on June 28, 2022 from https://www.azooptics.com/News.aspx?newsID=27636.

  • MLA

    Laser Components (UK) Ltd.. "Laser Components' Output Couplers". AZoOptics. 28 June 2022. <https://www.azooptics.com/News.aspx?newsID=27636>.

  • Chicago

    Laser Components (UK) Ltd.. "Laser Components' Output Couplers". AZoOptics. https://www.azooptics.com/News.aspx?newsID=27636. (accessed June 28, 2022).

  • Harvard

    Laser Components (UK) Ltd.. 2022. Laser Components' Output Couplers. AZoOptics, viewed 28 June 2022, https://www.azooptics.com/News.aspx?newsID=27636.

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Your comment type
Submit