Fiber Optic Center, Inc. announces the Hernon® Tuffbond® 302 Epoxy Adhesive Packaged by ÅngströmBond

Fiber Optic Center, Inc., (FOC), an international leading distributor specializing in helping their customers make the best cable assemblies in the world, announces  the addition of Hernon® Tuffbond® 302 epoxy adhesive, packaged by ÅngströmBond, to their extensive epoxy line.

Tuffbond® 302 consistently performs under temperature cycling from -54C to 85C.  It is a high viscosity material that flows well and cures fast.  Known as a ‘5 minute epoxy’, it does not absorb humidity exhibiting moisture chemical and heat resistance. Tuffbond® 302 is used in the fiber optic industry for potting and encapsulation.   It is also recommended for bonding metals, wood, ceramics, etc., and can be used for potting and encapsulation of electrical and electronic components.

Product Benefits include:

  • Fast cure at room temperature (about 5 minutes)
  • Low shrinkage
  • 100% reactive, non-solvent system
  • Easy mixing ratio of resin and hardener
  • No fuming on gelation

Refer to the full datasheet for Typical Properties, both uncured and cured, storage, and applications: http://bit.ly/2bE5Gzl

For safe handling information on this product, consult the Material Safety Data Sheet (SDS) tab on the product page: http://bit.ly/2aYDod0

Technical questions on Tuffbond® 302 can be asked to Kelly Barker, Fiber Optic Center, Inc.’s Epoxy Technical Manager at 508-264-5600 or email: [email protected]

Additional resources from the FOC team include:

For an appointment to speak with Kelly Barker at ECOC, please contact Kathleen Skelton at [email protected]

Fiber Optic Center, Inc., (FOC), is an international leader in distributing fiber optic components, equipment and supplies and has been helping customers make the best cable assemblies in the world for over two decades.  Several areas of specialization and expertise, in which they are the industry leader, make them the preferred choice for many of the world’s fiber professionals.  In these key technology areas, FOC is “at least as technical as the manufacturer” about the products they sell.  Striving to “make the business part easy,” they offer outstanding and personal customer service, low or no minimum purchase order values, and from-stock delivery on industry-leading products and technology.  FOC is the industry connection to the most innovative optical products, technologies and technical experts who integrate their manufacturing knowledge and vast experience into customers’ worldwide operations. @FiberOpticCntr

Fiber Optic Center, Inc., 23 Centre Street, New Bedford, MA 02740-6322

Toll Free in US: 800-IS-FIBER or 800-473-4237 . Direct 508-992-6464  . Email: [email protected]  

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    Fiber Optic Center, Inc.. (2016, August 18). Fiber Optic Center, Inc. announces the Hernon® Tuffbond® 302 Epoxy Adhesive Packaged by ÅngströmBond. AZoOptics. Retrieved on September 15, 2019 from https://www.azooptics.com/News.aspx?newsID=22868.

  • MLA

    Fiber Optic Center, Inc.. "Fiber Optic Center, Inc. announces the Hernon® Tuffbond® 302 Epoxy Adhesive Packaged by ÅngströmBond". AZoOptics. 15 September 2019. <https://www.azooptics.com/News.aspx?newsID=22868>.

  • Chicago

    Fiber Optic Center, Inc.. "Fiber Optic Center, Inc. announces the Hernon® Tuffbond® 302 Epoxy Adhesive Packaged by ÅngströmBond". AZoOptics. https://www.azooptics.com/News.aspx?newsID=22868. (accessed September 15, 2019).

  • Harvard

    Fiber Optic Center, Inc.. 2016. Fiber Optic Center, Inc. announces the Hernon® Tuffbond® 302 Epoxy Adhesive Packaged by ÅngströmBond. AZoOptics, viewed 15 September 2019, https://www.azooptics.com/News.aspx?newsID=22868.

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Submit