Posted in | News | Fibre Optics

SCTE's Cable-Tec Expo: EMCORE to Showcase End-to-End DOCSIS 3.1 CATV Transmission Link

EMCORE Corporation, a leading provider of compound semiconductor-based components and subsystems for the fiber optics and space solar power markets, announced today that it will host a demonstration of its End-to-End DOCSIS 3.1 CATV transmission link capabilities at the Society of Cable Television's (SCTE) Cable-Tec Expo in Booth #1505, September 23-25 at the Colorado Convention Center, Denver, Colorado.

A DOCSIS 3.1 compliant prototype of EMCORE's Medallion 6000 Series 1550 nm CATV Transmitter will be featured in the demonstration, along with the new Medallion 2100 Optical A/B Switch and Medallion 7100 CATV Fiber Amplifier transmitting over a 40 km fiber link to EMCORE's RFoG (Radio Frequency over Glass) Transceiver.

The Medallion 6000 externally-modulated transmitter, based on EMCORE's proprietary continuous wave laser technology, couples high optical output power up to 11.0 dBm, with low optical linewidth resulting in unmatched performance. The transmitter leverages proprietary pre-distortion circuitry to provide superior CTB and CSO performance with SBS suppression levels of greater than 21 dBm through 40 km of fiber. The Medallion 2100 Optical A/B Switch is a high-performance solution for network protection and optical redundancy in CATV/FTTx networks. Its automatic switching protects the network from inadvertent service outages due to up-stream optical signal degradation. EMCORE's Medallion 7100 Fiber Amplifier provides very stable optical outputs over a wide operating temperature range, as well as the exceptionally high power and low noise figures demanded by CATV applications. EMCORE's RFoG Transceiver is PON (Passive Optical Network) compatible and supports 1310/1590/1610 nm burst mode analog return-path, and digital or QAM upstream.

"Our end-to-end DOCSIS 3.1 demonstration at the Cable-Tec Expo will show EMCORE's capabilities to deliver the highest quality video and audio, along with high-speed data transmission in a DOCSIS 3.1 compatible system," said Gyo Shinozaki, Director of Marketing for EMCORE's CATV products. "EMCORE's line of CATV components and systems will support Cable operators as they move to this latest DOCSIS standard for higher-speed data transfer over their existing CATV networks," added Shinozaki.

Source: http://www.emcore.com/

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    Emcore Corporation. (2019, February 25). SCTE's Cable-Tec Expo: EMCORE to Showcase End-to-End DOCSIS 3.1 CATV Transmission Link. AZoOptics. Retrieved on October 25, 2021 from https://www.azooptics.com/News.aspx?newsID=19790.

  • MLA

    Emcore Corporation. "SCTE's Cable-Tec Expo: EMCORE to Showcase End-to-End DOCSIS 3.1 CATV Transmission Link". AZoOptics. 25 October 2021. <https://www.azooptics.com/News.aspx?newsID=19790>.

  • Chicago

    Emcore Corporation. "SCTE's Cable-Tec Expo: EMCORE to Showcase End-to-End DOCSIS 3.1 CATV Transmission Link". AZoOptics. https://www.azooptics.com/News.aspx?newsID=19790. (accessed October 25, 2021).

  • Harvard

    Emcore Corporation. 2019. SCTE's Cable-Tec Expo: EMCORE to Showcase End-to-End DOCSIS 3.1 CATV Transmission Link. AZoOptics, viewed 25 October 2021, https://www.azooptics.com/News.aspx?newsID=19790.

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Submit