Physical and Mechanical Properties of Corning Glass ULE by Insaco

ULE® is an ultra-low-expansion glass with a very low coefficient of thermal expansion.

Mechanical Properties of Corning Glass ULE®

The mechanical properties of Corning Glass ULE® are mentioned in the table below:

Property Value*
Density 2.2 gm/cc
Hardness 49 Knoop
Modulus of Elasticity 9.8 x 106 psi
Poisson's Ratio 0.17

*All properties are at room temperature unless otherwise noted.

Electrical Properties of Corning Glass ULE®

The electrical properties of Corning Glass ULE® are mentioned in the table below:

Property Value*
Volume Resistivity 1 x 1011.6 ohm-cm

*All properties are at room temperature unless otherwise noted.

Thermal Properties of Corning Glass ULE®

The thermal properties of Corning Glass ULE® are mentioned in the table below:

Property Value*
Coefficient of Thermal Expansion 0.00 +/- 0.03 x 10-6/°C
Thermal Conductivity 1.31 W/mK
Specific Heat 0.18 cal/g°C
Maximum Working Temperature 800°C

*All properties are at room temperature unless otherwise noted.

Optical Properties of Corning Glass ULE®

The optical properties of Corning Glass ULE® are mentioned in the table below:

Property Value*
Index of Refraction 1.48

*All properties are at room temperature unless otherwise noted.

Other Glass Ceramics Supplied by Insaco

Other Glass Ceramics Supplied by Insaco include:

About Insaco

For more than 60 years, Insaco has been synonymous with excellence in the development and production of high precision machined parts. As a custom fabricator of ceramic, glass, sapphire, and other hard materials, Insaco specializes in machining parts that often require tolerances measured in millionths of an inch, and wear properties that satisfy even the most demanding applications.

This information has been sourced, reviewed and adapted from materials provided by INSACO Inc.

For more information on this source, please visit INSACO Inc.

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    INSACO Inc. - Machining of Hard Materials. (2018, August 30). Physical and Mechanical Properties of Corning Glass ULE by Insaco. AZoOptics. Retrieved on September 23, 2020 from https://www.azooptics.com/Article.aspx?ArticleID=250.

  • MLA

    INSACO Inc. - Machining of Hard Materials. "Physical and Mechanical Properties of Corning Glass ULE by Insaco". AZoOptics. 23 September 2020. <https://www.azooptics.com/Article.aspx?ArticleID=250>.

  • Chicago

    INSACO Inc. - Machining of Hard Materials. "Physical and Mechanical Properties of Corning Glass ULE by Insaco". AZoOptics. https://www.azooptics.com/Article.aspx?ArticleID=250. (accessed September 23, 2020).

  • Harvard

    INSACO Inc. - Machining of Hard Materials. 2018. Physical and Mechanical Properties of Corning Glass ULE by Insaco. AZoOptics, viewed 23 September 2020, https://www.azooptics.com/Article.aspx?ArticleID=250.

Ask A Question

Do you have a question you'd like to ask regarding this article?

Leave your feedback
Submit