Posted in | Light Sources

Mini, Compact & Linear LED Bar Lights Available in Multiple Wavelengths

The LM45 and LM75 Series of mini LED bar lights are Smart Vision Lights’ smallest and most compact linear lights. Featuring Multi-Drive™ technology, they allow either for the continuous operation of the light or OverDrive™ Strobe mode. These lights are extremely bright and are available in various different wavelengths to accommodate any application needs.

The LEDs are protected both from premature degradation and failure resulting from excessive heat by the built-in Multi-Drive™. This feature regulates the current the LEDs receive and limits the light’s duty cycle.

Simple wiring is ensured by the industry standard 5-pin M12 connector, and the light is given a broad spectrum of illumination area by multiple lensing options. The user has complete control over the light’s intensity with the 0-10 V analog control.

LM45 Series

The Multi-Drive™ feature is included in the built-in driver. This feature enables the user to operate the light in either a constant ‘ON’ operation or OverDrive the linear, dependent upon the wiring method.

Simple wiring is ensured by the industry standard 5-pin M12 connector, and the light is given a broad spectrum of illumination area by multiple lensing options. The user has complete control over the light’s intensity with the 0-10 V analog control.

Product Details

  • Driver Built In – No External Wiring To A Driver
  • 5-Pin M12 Quick Disconnect Cable
  • Over-Current Protection
  • PNP and NPN Strobe Input
  • Continuous Operation or Strobe Mode
  • (4) High Output LEDs

LM75 Series

The Multi-Drive™ feature is included in the built-in driver. This feature enables the user to operate the light in either a constant ‘ON’ operation or OverDrive the linear, dependent upon the wiring method.

Simple wiring is ensured by the industry standard 5-pin M12 connector, and the light is given a broad spectrum of illumination area by multiple lensing options. The user has complete control over the light’s intensity with the 0-10 V analog control.

Product Details

  • Driver Built In – No External Wiring To A Driver
  • 5-Pin M12 Quick Disconnect Cable
  • Over-Current Protection
  • PNP and NPN Strobe Input
  • Continuous Operation or Strobe Mode
  • (8) High Output LEDs

CAD Drawings for the Mini Linear Lights

Product PDF DXF STEP
LM45
LM75

All DXF and STEP files saved in a zip folder for easy downloading

Wavelength Colors

With other wavelengths available upon request, the mini LED linear lights can be purchased in the following wavelength colors:

Lens Options

The mini linear lights come standard with a narrow 40° lens. Narrow 16° (N16), Narrow 25° (N25), Wide 80° (W) and Line (L) lenses are available.

Multi-Drive™ Wiring

Wiring configuration for CONSTANT ON operation

* Some cables use green with yellow stripe for 1-10 V adjustment.

Wiring configuration for STROBE/PULSE operation

*Analog intensity control is disabled in OverDrive Mode. Light operates at maximum pulse intensity.

Standard Mounting

Mounting is done by use of the rear T-slot mount
Includes (2) M4x16 screws and (2) M4 nylon nuts.

Optional Mounting Brackets

Mounting for LM45 - Part #: BKT0025

Mounting for LM75 - Part #: BKT0026

Other Equipment by this Supplier